The Dead Air Nomad Ti XC Xeno pairs Dead Air’s lightest .30 caliber suppressor with the Xeno quick-detach mounting system for shooters who want to move one can fast between multiple rifles without sacrificing performance. It ships ready to run with a Xeno adapter and a 5/8×24 Omni Brake, so you get a repeatable, tool-free lock-up and effective recoil and flash management out of the box.

The Nomad TI XC is the same award-winning platform: a Grade 5 titanium body weighing 7.4 oz bare (9.7 oz with the Xeno adapter), rated all the way to .300 RUM. Dead Air’s enhanced two-stage coaxial baffle system, produced with additive manufacturing, uses pressure-harnessing structures to tame both low- and high-pressure rounds — delivering strength, precision, and sound suppression that defy how light this can is.

The Xeno interface is what sets this configuration apart. Mount a Xeno Omni Brake (or compatible Xeno muzzle device) on each host, and the Nomad Ti XC screws on and off in seconds with a consistent return to zero every time. Because it’s built on the Dead Air HUB platform, you’re never locked in — swap to direct thread or another HUB adapter whenever your setup changes.

Why choose the Xeno configuration:

• Quick-detach speed — tool-free on/off in seconds; ideal for running one suppressor across several rifles.
• Repeatable zero — the Xeno lock-up returns to point of impact reliably, shot after shot, host after host.
• Includes the Omni Brake — 5/8×24 muzzle brake in the box for recoil and flash control at the muzzle.
• Same ultralight titanium — 7.4 oz bare / 9.7 oz mounted, rated to .300 RUM.
• HUB modular — switch to direct thread or other mounts anytime; one can, many hosts.

Technical Specifications:

• Weight: 7.4 oz
• Weight with Mount: 9.7 oz
• Length: 7.03″
• Diameter: 1.76″
• Material: Grade 5 Titanium
• Finish: Cerakote (BLK or FDE); Raw Titanium Satin Bead Blasted (Silver)
• Barrel Restrictions: 12.5” supersonic (5.56 NATO), 6” subsonic (.300 BLK)

What’s in the Box:

• Dead Air Nomad TI XC Suppressor
• Dead Air Xeno Adapter
• Dead Air Omni Brake 5/8X24
• Owners Manual

FAQ 

What is the Xeno mount on the Nomad Ti XC? 

Xeno is Dead Air’s quick-detach mounting system. You install a Xeno-compatible muzzle device (the included Omni Brake) on your host, and the suppressor locks on and off tool-free in seconds with a repeatable return to zero.

What comes with the Nomad Ti XC Xeno? 

The suppressor, a Dead Air Xeno adapter, a 5/8×24 Omni Brake, and the owner’s manual — everything you need to mount and run it on a 5/8×24 host.

How much does the Xeno configuration weigh? 

The bare titanium body is 7.4 oz. With the Xeno adapter installed it weighs 9.7 oz, and overall length is 7.03″.

Can I run the Nomad Ti XC Xeno on more than one rifle? 

Yes — that’s the point of Xeno. Add an Omni Brake (or compatible Xeno muzzle device) to each host and move the single suppressor between them quickly while maintaining zero.

Should I buy the Xeno or the Direct Thread version? 

Choose Xeno if you want quick-detach speed and plan to share one can across multiple rifles. Choose direct thread if you want the lightest, simplest single-host setup. Both are HUB-compatible, so you can change mounts later.